Factory Authorized Parts™ – Blower Motor – ECM 120/240 VAC 1,300 RPM 1 HP
Item: 58MV660005
MFR: 58MV660005
Description
When looking for replacement motors, look no further than our Factory Authorized Parts (FAP)! FAP are designed to meet exact Carrier® Corporation specifications, ensuring optimum system performance, proven reliability, easy installation and maintenance and safe system operation.
FAP Features
- Improved Efficiency – Motor runs at most efficient portion of motor performance curve by design
- Ensures motor is not overloaded
- Ensures that motor operates at the design RPM, which produces the correct airflow
- Reduced System Vibration – System design put motor RPM at optimal point for limiting torque pulsations that can generate excess vibration in the unit
- Reduced Noise – System qualification includes additional testing such as start/stop and pure tone noise identification which further ensures there is not excessive vibration or noise during unit operation.
- Overall length of motor assures that fan is located at intended position to minimize sound and maximize airflow
- Reduced stress on components
- Natural frequencies of the top system are determined through design process.
- Motor operating frequencies are designed away from these resonances
- Reduced wear on system
- Motors tested to Temprise standard, stricter than required by UL 1995.
- Motors must meet maximum winding temperatures required by UL at higher ambient and wider voltage ranges (RES-SPL-CQR-0012A)
- Stringent design-life testing provides longer life 100,000 on/off cycles and 50,000 total running hours; 15 years.
- Reliability Testing Regimen – Each motor chassis design goes through internal and supplier testing including salt spray, torture, life, and operational envelope testing. (CC14BD002 and Alternating Current Fan Motor Standard)
- Raceway Connections – FAP motors have liquid tight connector for lead exit that connects to raceway.
- Wire Terminations and Lengths – Wire terminations are the same as production motors so no termination is necessary. Wire lengths reach required end points without alteration.
- Fewer On-site Modifications required – Fan guards and top covers are designed to accept FAP motors without modification.
- Exact size fit means easiest access.
- Few Hardware issues – Hardware used to mount and secure original motor can be used to mount replacement motor UL & CSA Qualified Both the CBP unit and the FAP motor are UL & CSA qualified. Using the FAP motor maintains UL & CSA qualification of the equipment
-
Specifications
Dimensions Length 11 inches (in) Width 11 inches (in) Height 11.75 inches (in) Weight 17.85 pounds (lbs) Attributes Amps 7.4-12.8 Brand Factory Authorized Parts CSA Listing Yes Country of Origin MEX Cubic Measurement 0.8228 Cycle/Hertz 60 Hz Dimensional Weight 10 Duty (S1) Continuous Running Duty Full Load Amps 7.4-12.8 GTIN 00822529339009 Insulation Class F Motor HP 1 HP Motor Type ECM (Electronically Commutated Motor) NEMA Frame 39 Phase Single Prop 65 No RPM 1,300 Rotation Reversible Shaft Diameter 1/2″ Shaft Length 3 15/16″ UOM EA UPC 822529339009 Voltage 120/240 VAC