Factory Authorized Parts™ – HC41AE117 Blower Motor 1/3 HP 115 V 5.2 Amp 1075 RPM
Item: HC41AE117
MFR: HC41AE117
Description
When looking for replacement motors, look no further than our Factory Authorized Parts (FAP)! FAP are designed to meet exact Carrier® Corporation specifications, ensuring optimum system performance, proven reliability, easy installation and maintenance and safe system operation.
FAP Features
- Improved Efficiency – Motor runs at most efficient portion of motor performance curve by design
- Ensures motor is not overloaded
- Ensures that motor operates at the design RPM, which produces the correct airflow
- Reduced System Vibration – System design put motor RPM at optimal point for limiting torque pulsations that can generate excess vibration in the unit
- Reduced Noise – System qualification includes additional testing such as start/stop and pure tone noise identification which further ensures there is not excessive vibration or noise during unit operation.
- Overall length of motor assures that fan is located at intended position to minimize sound and maximize airflow
- Reduced stress on components
- Natural frequencies of the top system are determined through design process.
- Motor operating frequencies are designed away from these resonances
- Reduced wear on system
- Motors tested to Temprise standard, stricter than required by UL 1995.
- Motors must meet maximum winding temperatures required by UL at higher ambient and wider voltage ranges (RES-SPL-CQR-0012A)
- Stringent design-life testing provides longer life 100,000 on/off cycles and 50,000 total running hours; 15 years.
- Reliability Testing Regimen – Each motor chassis design goes through internal and supplier testing including salt spray, torture, life, and operational envelope testing. (CC14BD002 and Alternating Current Fan Motor Standard)
- Raceway Connections – FAP motors have liquid tight connector for lead exit that connects to raceway.
- Wire Terminations and Lengths – Wire terminations are the same as production motors so no termination is necessary. Wire lengths reach required end points without alteration.
- Fewer On-site Modifications required – Fan guards and top covers are designed to accept FAP motors without modification.
- Exact size fit means easiest access.
- Few Hardware issues – Hardware used to mount and secure original motor can be used to mount replacement motor UL & CSA Qualified Both the CBP unit and the FAP motor are UL & CSA qualified. Using the FAP motor maintains UL & CSA qualification of the equipment
| Dimensions | |
|---|---|
| Length | 5.7 inches (in) |
| Width | 5.7 inches (in) |
| Height | 9.5 inches (in) |
| Weight | 10.6263 pounds (lbs) |
| Attributes | |
| Blower Motor HP | 1/3 HP |
| Brand | Non-Branded |
| CSA Listing | Yes |
| CUL Recognized | No |
| Country of Origin | VNM |
| Cubic Measurement | 0.1786 |
| Cycle/Hertz | 60 Hz |
| Dimensional Weight | 6 |
| Full Load Amps | 5.2 |
| GTIN | 00662441485015 |
| Motor HP | 1/3 HP |
| Motor Type | PSC (Permanent Split Capacitor) |
| NEMA Frame | 48 |
| Phase | Single |
| Prop 65 | No |
| RPM | 1,075 |
| Rotation | Counter Clockwise (CCW) |
| UOM | EA |
| UPC | 662441485015 |
| Voltage | 115 VAC |